KVL Comp Kft.
 
Home | Products | Identification
 (pic)

KVL-RFID03

With RFID antenna: The installed RFID devices primary role is to identify the incoming car. According to the message from the server it starts to scan the data from the tag. After the successful scanning it sends the data to the server....
 (pic)

KVL-TVP02

Its purpose is to eliminate the picking of wrong parts due to workers’ fault. KVL-TVP02 is an individual part identificator; it is not directly connected to the production line. The controller receives the data of the unit to be manufactured from...
 (pic)

KVL-TVP01

Its purpose is to eliminate the picking of wrong parts due to workers’ fault. KVL-TVP01 is an individual part identification; it is not directly connected to the production line. The controller receives the data of the unit to be manufactured from...
 (pic)

KVL-RFID01/02

With RFID antenna: The installed RFID devices primary role is to identify the incoming car. According to the message from the server it starts to scan the data from the tag. After the successful scanning it sends the data to the server....
The identification device is identifying the bodywork/part as follows: 1. Bodywork identification with RFID reader (MOBY-U) and wired bar code reader (nostrategy). 2. Bodywork identification with wired bar code reader (nostrategy). 3. Part identification (TVP) with wireless and wired bar code reader (nostrate-gy). 4. Bodywork identification with RFID reader (MOBY-U) and wired bar code reader (nostrategy) part identification (TVP) with wired and wireless bar code reader (nostrategy). The occurring errors can be acknowledged with key switches. The controllers operation and the error messages are displayed on the light column. The light column gives sound and light (green/yellow/red) signals.