KVL Comp Kft.
 

changethis

IDENTIFICATION DEVICE WITH ETHERNET NETWORK

With RFID antenna:
The installed RFID devices primary role is to identify the incoming car.
According to the message from the server it starts to scan the data from the tag. After the successful scanning it sends the data to the server. The server based on the data makes a search in the database. After the successful search the server indicates  a message that it found the car in the database. After this the RFID turns on the green light on the light tower and sends a „Work done“ message to the server. In case that the RFID is not ready to work according to INI2 and INI3 messages it gives sound and light signals showing the actual state of the work to the operator. In case that the RFID cannot scan the data from the tag the device automatically indicates to the operator, that he has to identify the incoming car with a bar code reader for the interest of further work. The scanned bar code data the RFID sends to the server. According to this data the server searches for the car, it sends a successful or unsuccessful search message to the RFID. Based on the content of the message the RFID indicates a „work done“ or „the bar code was not appropriate“ message to the operator (the server did not find this car in the database).
 
Without RFID antenna:
The RFID according to the message from the server decides what working mode he has to operate on further. In that case that the server sends that information, that the car is allready identified from the main line data it sends a work done sign back to the server. If the server does not get the information about the car from the main line, the RFID indicates to the operator that he has to identify the car with the bar code reader. The identification process described above.
 
RFID device with antenna and part number checking function (TVP):
The RFID devices primary role is to identify the car arriving to the workplace. After this to check if the part numbers are the correct ones according to the data what it received from the server. The RFID according to the message from the server starts to scan the data from the tag. After the successful scanning it sends the scanned data to the server. The server makes a search in the database according to this data. After the successful search it indicates in a message that it found the car in the database. The server sends a message to the device about the needed identification numbers of the spare parts what needs to be built in. The device compares the part numbers to the saved data and if it finds a match it indicates a “successful reading” message to the operator. In case that the read in part number is not amoung the saved data it indicates as an “incorrect reading.“ When the operator builts in all the parts what he checked with the bar code reader, the device sends a “work done” message to the server and the green light glows. If it is more than one part from the same kind what needs to be built in, the operator needs to scan the barcode of the parts as many times as many parts are needed. In case that the RFID is not ready to work according to INI2 and INI3 messages it gives sound and light signals showing the actual state of the work to the employee.
 
RFID device without antenna with part cheking function (TVP):
The RFID devices primary role is to check the spare part numbers what has to be built in and to identify the car arriving to the workplace. The RFID according to the message what he receives from the server decides what operating mode he has to work on further. In that case when the server sends a message that the incoming car is already identified, it is waiting for the data needed for the further operation. After receiving the data it indicates to the operator to scan the barcode number with the barcode reader what was built in.
If the server sends a message to the device that there is no information about the incoming car, than the device indicates to the operator that the identification of the car is necessary for further work. The operator with the barcode reader scans the barcode of the bodywork and the device sends it to the server. The server makes a search in the database, if it finds it then it informs the device in a message about the successful hit found.
After the device received the data, it indicates to the operator, that a part identification is necessary. When the operator scanned all the part numbers with the barcode reader the device indicates that the work is done and sends a “work done” message to the server.
In case that the RFID is not ready to work according to INI2 and INI3 messages it gives sound and light signals showing the actual state of the work to the operator.
 
RFID device without antenna only with spare part checking function:
The RFID devices only role is to check the part numbers what has to be built in. After the INI1 signal received from the server, the device is waiting for the data what is necessary for the work. If the device received this data it indicates to the operator that a part identification is needed.
When the operator scanned all the part numbers with the barcode reader the device indicates that the work is done and sends a “work done” message to the server.
In case that the RFID is not ready to work according to INI2 and INI3 messages it gives sound and light signals showing the actual state of the work to the operator.