KEY SWITCH MODULE WITH AS-I CONTROLLER
This key switch module can work for a Poka-Yoke system, which use AS-i network. This module acknowledges the failure by using key switch.
Errors acknowledgement with key switch.
The module has to be used when the red lamp is on, then the failure will acknowledge by the E7 key.
The acknowledge unit can be connected to the AS-I network to any place in order to be easily reachable for the operator.
The module can be mounted in the TRILOGIQ shelf with plastic clamp.
The module can be mounted to tubular frames with a plastic clamp.
The modules are delivered with clamps for tubular frames of 28 - 28,4 mm in diameter. If other needs arise, the diameter of the tube used should be provided on order.